After we purchased the cement tanker, we needed to know how to use it. Then Panda introduces some of the unloading and loading in detail, hoping to help everyone.
1) What is a dry bulk cement tanker?
Cement tanker as known as a pneumatic dry bulk trailer, powder tanker, or bulk trailer.
Cement bulkers are used for transporting cement, lime, sand, and kinds of diameter ¡Ü 0.1mm bulk powder materials.
Panda dry bulk tanker?capacity: 28 to 120 tons, volume: 22 to 100 cbm. £¨what is a cement pig trailer£©
Cement trailer being sold
2) How to load cement tankers?
1. Before loading cement into the cement trailer, first open the exhaust valve to ensure that the air in the tank has been removed to prevent accidents.
2. Then open the manhole cover, place the filter, and then load cement or other dry powder materials.
3. After loading, wipe off the cement or other powder on the sealing ring and close the manhole cover tightly.
4. In the end, close?the exhaust valve, and ensure that the butterfly valve and discharge valve are closed to avoid loss in transportation.
Fastest way to unload bulk cement
Different modes of cement transport also have different unloading methods, the fastest unloading method is to use the pneumatic cement unloading system. The cement is transferred from the cement tanker to the storage silo or other storage containers by air compressors.
3) How does the cement tanker work?
The most crucial of cement trailers is the job of the air compressor. The compressed air is transported through the pipeline to the air chamber in the sealed tank, so that the particles inside can be suspended. When the pressure inside the tank reaches a certain value, the discharge valve can be opened and the material inside can be transported through the pipeline.?
The pneumatic cement trailer work method is unloading fly ash from bottom hopper tanker. Related:??How does the pneumatic trailer work?
5) How to unload the cement tanker trailer safely?
1. The discharge pipe should be connected first. When the discharge pipe is connected, the seal ring should be closed; the inlet and outlet valves of the front and rear air chambers should be opened first, then the valves are closed: the pressure relief ball valve, External air source ball valve, secondary air ball valve, discharge butterfly valve.
2. Start the engine and the air compressor smoothly. Then gradually give more fuel, so that the air compressor can reach the rated speed and inflate the cement tank.
3. When the pressure rises to 0.15Mpa, open the secondary air ball valve to clean the discharge pipe, ensuring that the discharge pipe is not blocked. Then the secondary air ball valve can be closed.
4. When the pressure is 0.2Mpa, the discharge butterfly valve should be opened to start unloading.
unload cement bulker
5. Close the front air chamber and only let the rear air chamber intake. Observe the pressure gauge and whether it rises. If it rises, it means that it is not unloaded. When the pressure rises to 0.02Mpa, start to unload.
6. If the pressure value does not rise, it shows that the rear part has been unloaded. When it shows that the rear part finishes unloading, the front air chamber is opened into the balloon valve, the same principle as that of the rear air chamber.
7. At last, confirm that there is no residue in the front and rear air chambers. Then turn off the engine and the air compressor. Open the pressure relief ball valve. Close the discharging butterfly valve. Remove the unloading quick joint. Take down the hose and put it back in the vehicle. The unloading job is completed.
6) Video – unloading cement trailer
7) How to clean the cement tanker?
Dry bulk trailer?generally does not need to be cleaned, because the powder loaded can be unloaded. If there is a little residue, it is harmless. It can be washed directly with water if it needs to be leaned.
There are few companies cleaning cement tank trailers. They usually clean the trailers themselves.
8) Dry bulk cement tanker trailer for sale
Panda Mech is a cement tank?trailer?manufacturer in?China. We supply 25-120 ton cement tanker trailers, which can be customized?according to your needs. Contact us for the latest price. (Pneumatic tank trailer price depends on spec.)
Faq
how much does a loaded cement truck weigh
The cement truck’s weigh can be 30-120 tons.
Best-selling fuel tanker recommended
1. 50 Ton Cement Bulk Trailer For Sale
Loading rate >98% fully filling
Residual rate <0.3%
Delivery height >30m is suitable for most silo
Faster unloading >1.5ton/min
Transport: cement, sand, flour, and other granular materials, etc;
Discharging speed:1.5 tons/minute
Supply Ability: 200unit/Sets per Month
3. 25 Ton Bulk Cement Tanker Trailer For Sale
Panda Mech is 30 ton bulk cement tanker manufacturer from China. We supply 27 cbm bulk cement trailer for sale. 27 cubic meter cement trailer capacity 30 ton.
4. 85 Ton Cement Trailer For Sale
Panda Mech is 85 Ton cement trailer manufacturer from China. We supply 85 Ton cement trailer for sale. 70 cubic meter cement trailer capacity 85 tons.
CONCLUSION:
If you want to purchase cement bulk trailers or have questions about the cement bulk trailers, leave a message with us. PANDA MECH is your best choice. As a professional manufacturer with decades of production experience, we have provided various production solutions for tens of thousands of users in and abroad.
We can help you to choose the most suitable cement bulk trailers. Also, we can provide comprehensive after-sales service, whether it is about the operation, reparation, or maintenance.